The Anker Soundcore R60i NC are noise cancelling earbuds with adaptive ANC rated at up to 52dB and Hi-Res audio through LDAC. 11mm drivers handle the sound. They play 10 hours per charge with ANC off and 50 hours with the case, and a 10-minute charge gives 3.5 hours. The soundcore app adds AI translation and the Anka voice assistant.
Key Specs
- Type: true wireless noise cancelling earbuds
- Noise cancelling: adaptive ANC, up to 52dB
- Sound modes: Noise Cancellation, Normal, Transparency
- Drivers: 11mm
- Frequency response: 20Hz to 20kHz
- Impedance: 14.2Ω
- Codec: LDAC (Android 8.0 or later)
- Bluetooth 6.1, range up to 10 metres
- Dual connection: on by default
- Google Fast Pair: Android 6.0 or later
- Playtime with ANC off: 10 hours per charge, 50 hours with the case
- Playtime with ANC on: 8 hours per charge, 40 hours with the case
- Fast charging: 10 minutes gives 3.5 hours
- Charging time: earbuds 1 hour, case about 3 hours
- Battery: 60mAh per earbud, 800mAh case
- Dust and water resistance: IP55 (earbuds only)
- Ear tips: XS, S, M, L (M fitted)
- Case: LED light strip shows battery level
- App: soundcore app for Android and iOS, with EQ, Spatial Audio, HearID, LDAC, fit test, AI translation, Anka AI assistant and firmware updates
Adaptive ANC reads the noise around you and adjusts on its own. Switch to Transparency in the app to hear traffic or a colleague, or to Normal for plain playback.
Run the fit test in the soundcore app and try the four ear tip sizes. A proper seal makes the noise cancelling work at full strength.
LDAC streams Hi-Res audio from Android 8.0 or later phones. Turn it on in the app under Sound Mode, Preferred Audio Quality. It uses more battery and works best with little Bluetooth interference. iPhones do not support LDAC.
Dual connection keeps the earbuds linked to two devices. To add a second device, hold both earbud stems for 3 seconds until you hear the pairing prompt.
AI translation in the soundcore app translates speech in real time for lectures, or face-to-face between you and another person. Turn off dual connection before using it. Say “Hey Anka” to ask the Anka assistant questions, check the weather or hear the news. Both features need the app open and connected.
Open the case and the LED strip shows battery: solid red at 20% or below, solid white above 20%.
IP55 protects the earbuds against dust, sweat and rain. Dry them and the USB-C port fully before charging.
Earwax builds up on the metal mesh under the ear tips. Wipe it with a cotton swab lightly dampened with rubbing alcohol, and let it dry before use.
To reset, hold the touch area on both earbuds for 10 seconds until you hear a tone.
Nairobi orders arrive in 15 to 60 minutes. Delivery across the rest of Kenya is same day. You pay on delivery by M-Pesa or cash.
What’s in the box: Anker Soundcore R60i NC earbuds, charging case, ear tips in 4 sizes (XS, S, M, L), USB-C charging cable.
